Asko refrigerator
showing E0
On the RBR276 models E0 means the power board is not getting through to the user-interface electronics behind the display.
Mon–Sat, 8am–8pm
- Communication
- Controls and sensors
- Source: ASKO
Book a visit
Three short steps, about a minute.
or call (844) 681-4650
Loading appointment form…
The appointment form couldn’t load. Please try again.
What E0
actually means.
On the RBR276 models E0 means the power board is not getting through to the user-interface electronics behind the display. The appliance goes into safe mode and keeps what it considers the most suitable temperature until a technician has repaired it.
ASKO refrigerator display
What to do when E0 shows on the refrigeratorKind of codeCommunication
Two boards that stopped hearing each other — the main control and the display, or the inverter. A harness is checked before a board.
Usually leads toControls and sensors
A refrigerator cools to what it believes the temperature is, and a sensor reading wrong is obeyed perfectly.
Shows up asRefrigerator Control Panel Not Responding
Buttons do nothing, the display is blank or frozen, or settings will not hold.
MakeASKO
Scandinavian integrated refrigeration, mostly behind furniture panels.
SourceAsko Instructions for use, models RBR276SND1 / RBR2764DND1 / RBR2767DND1 / RBR276DND1, troubleshooting table (PDF on the Gorenje Group document server)
Asko RBR276SND1, RBR2764DND1, RBR2767DND1 and RBR276DND1 (one Instructions for use covers all four). On the R31442I, E0 means something narrower: the touch keys do not respond.
Before you book,
in this order.
Each step comes from ASKO's own guidance for E0 on its refrigerators. Follow it to the end: the last card says whether this is a visit.
Leave it plugged in and running; safe mode keeps the cabinet cold by itself.
Copy the model and serial number from the label inside the compartment, which Asko asks for whenever a repair is arranged.
Book a visit, because the manual offers no owner fix for E0 on these models.
What not to do
E0 here is not about keys that are dirty or locked. The power board has lost touch with the display electronics, which is why the manual goes straight to a repair.
What you may
notice with it.
The refrigerator problem E0 tends to arrive with. Answer these at the refrigerator before anyone is booked.
All problems
Where E0 usually leads
Controls and sensors.
Read these
before the visit.
Short guides that make the call quicker and the diagnosis cheaper.
All guidesASKO
refrigerators.
Scandinavian integrated refrigeration, mostly behind furniture panels.
ASKO refrigerator repairMore ASKO codes
All 25 ASKO codesCommunication on other makes
Built-in refrigerator
Flush with the cabinets, serviced from the front, and almost always repaired rather than replaced.
Refrigerator column
Separate refrigerator and freezer towers, each with its own sealed system — so a failure stays on one side.
Undercounter refrigerator
A single 15 to 24 inch unit under the worktop — front-vented, tightly enclosed, and easily starved of air.
In ASKO's own words
Communication error from power board to user interface electronics.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Asko RBR276SND1, RBR2764DND1, RBR2767DND1 and RBR276DND1 (one Instructions for use covers all four). On the R31442I, E0 means something narrower: the touch keys do not respond.
ASKO E0 refrigerator repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about E0.
Can I clear E0 myself?
Can I fix E0 on my Asko RBR276 myself?
Will my Asko RBR276 stay cold while E0 is on?
Back to your everyday
Still showing E0?
Book with the exact characters, the full model number, and whether it is still cooling — on a code, that is the whole starting point.