The ventilation grille across the top of a built-in refrigerator set flush into pale cabinetry, the stainless doors below it falling out of focus.

Kenmore refrigerator
showing LED 4 flashes

Four flickers mean the control has sensed the refrigerator door open for more than an hour.

(844) 681-4650

Mon–Sat, 8am–8pm

  • Service indication
  • Diagnostic visit
  • Source: Kenmore

Book a visit

Three short steps, about a minute.

or call (844) 681-4650

Before you book,
in this order.

Each step comes from Kenmore's own guidance for LED 4 flashes on its refrigerators. Follow it to the end: the last card says whether this is a visit.

01

Check that the model label starts 111 and the freezer is the top door.

02

With the door open, press the switch plunger by hand and watch whether the light goes off; on these models the door switch is the light switch.

03

Book a visit if the door was closed and four flashes continue.

Still there?

It usually turns into diagnostic visit. Book with the code and the model number.

What not to do

Four flashes do not mean the refrigerator is warm. They are about the door switch reading.

What you may
notice with it.

The refrigerator problems LED 4 flashes tends to arrive with. Answer these at the refrigerator before anyone is booked.

All problems

Where LED 4 flashes usually leads

Diagnostic visit.

In Kenmore's own words

Main control board LED flickers 4 times Control senses refrigerator door open for more than 1 hour
Sears PartsDirect: Kenmore 111 top-freezer error codes (Wayback copy, Nov 2019)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Kenmore top-freezer models whose number starts 111; Sears ties four flashes to the refrigerator door switch.

Kenmore LED 4 flashes refrigerator repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family preparing a meal together in their kitchen
For the heart of your home.

Questions
about LED 4 flashes.

Can I clear LED 4 flashes myself?
Check that the model label starts 111 and the freezer is the top door. If it comes back, it needs a visit.
Why does my Kenmore 111 board flash four times when the door is shut?
Four flashes mean the control has sensed the refrigerator door open for over an hour. If the door was closed, the wiring from the switch to the board and the switch itself are checked.
Can I test the door switch behind four flashes on my Kenmore?
On these models the door switch is also the light switch, so press its plunger by hand with the door open and see whether the light goes off. Book a visit if the four flashes carry on with the door shut.

Back to your everyday

Still showing LED 4 flashes?

Book with the exact characters, the full model number, and whether it is still cooling — on a code, that is the whole starting point.

(844) 681-4650 Schedule a repair