The ventilation grille across the top of a built-in refrigerator set flush into pale cabinetry, the stainless doors below it falling out of focus.

JennAir refrigerator
showing Temperature Alarm

The refrigerator has been above 48°F, or the freezer above 15°F, for longer than an hour and a half, and JennAir says the alarm exists to help avoid food spoilage.

(844) 681-4650

Mon–Sat, 8am–8pm

  • Service indication
  • Diagnostic visit
  • Source: JennAir

Book a visit

Three short steps, about a minute.

or call (844) 681-4650

Before you book,
in this order.

Each step comes from JennAir's own guidance for Temperature Alarm on its refrigerators. Follow it to the end: the last card says whether this is a visit.

01

Check the food right away, starting with meat, dairy and anything thawed in the freezer.

02

Think about recent outages, doors left open or a large load of warm food.

03

Press the Over Temp or Over Temperature Reset button to clear it, then watch the temperatures.

04

If the compartments do not come back down within several hours, schedule a visit.

Still there?

It usually turns into diagnostic visit. Book with the code and the model number.

What not to do

It is not a maintenance reminder. It reports that the cabinet was warm, not the reason.

What you may
notice with it.

The refrigerator problem Temperature Alarm tends to arrive with. Answer these at the refrigerator before anyone is booked.

All problems

Where Temperature Alarm usually leads

Diagnostic visit.

In JennAir's own words

… the Over-Temp Alarm helps avoid food spoilage and high energy costs by sounding an alert when refrigerator temperatures remain at unusually high levels.
JennAir Product Help (producthelp.jennair.com): Temperature Alarm - Error Code - Column JennAir Product Help (producthelp.jennair.com): Over Temperature Light - Error Message - Built-In Refrigerator

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Built-in models show an Over Temperature light; column models call it the Over-Temp Alarm. Both use the 48°F and 15°F limits.

JennAir Temperature Alarm refrigerator repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family preparing a meal together in their kitchen
For the heart of your home.

Questions
about Temperature Alarm.

Can I clear Temperature Alarm myself?
Check the food right away, starting with meat, dairy and anything thawed in the freezer. If it comes back, it needs a visit.
Why does my JennAir alarm repeat every 90 minutes after start-up?
After a fresh start, the alarm keeps repeating until both compartments drop below 48°F and 15°F. It stops once the unit has cooled down.
Which food should I check first after a JennAir over-temperature alarm?
Start with meat, dairy and anything that thawed in the freezer, since JennAir intends the alarm to help avoid spoilage. Then clear it with the Over Temp button and watch the readings.

Back to your everyday

Still showing Temperature Alarm?

Book with the exact characters, the full model number, and whether it is still cooling — on a code, that is the whole starting point.

(844) 681-4650 Schedule a repair