The control panel on the door of a refrigerator seen close, its display softly lit with no readable characters, the stainless door falling out of focus around it.

Liebherr refrigerator
showing Power failure LED

When the power failure LED is lit and the freezer temperature is flashing, the freezer warmed up too much during a power cut in the last few hours or days.

(844) 681-4650

Mon–Sat, 8am–8pm

  • Mode, not a failure
  • No repair needed
  • Source: Liebherr

Book a visit

Three short steps, about a minute.

or call (844) 681-4650

Before you book,
in this order.

Each step comes from Liebherr's own guidance for Power failure LED on its refrigerators. Follow it to the end: the last card says whether this is a visit.

01

Touch the alarm icon to see the highest temperature reached during the outage. It shows for about a minute.

02

Check the food, since some of it may have got too warm or thawed.

03

Touch the alarm icon again to turn the display off.

Cleared?

Nothing needed repairing. If the refrigerator does not settle back to temperature, that is a separate problem.

What not to do

It does not mean the refrigerator is failing now. It tells you about an outage that has already happened.

What you may
notice with it.

The refrigerator problems Power failure LED tends to arrive with. Answer these at the refrigerator before anyone is booked.

All problems

No repair indicated

Nothing to repair.

A setting somebody chose, or an alert it raised on purpose — a showroom mode, a door or power alarm. Nothing has broken and no part is needed.

Read these
before the visit.

Short guides that make the call quicker and the diagnosis cheaper.

All guides

In Liebherr's own words

freezer temperature has risen too high during the last few hours or days due to a power failure.
Liebherr Use and Care Manual, NoFrost combined refrigerator-freezer CS 1640 (7082 481-01), Liebherr service document PDF Liebherr Use and Care Manual, NoFrost combined refrigerator-freezer CS 1640 (7082 481-01), Liebherr service document PDF

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Documented in Liebherr's manual for the CS 1640 NoFrost combined refrigerator-freezer. Other Liebherr models use different controls.

Liebherr Power failure LED refrigerator repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family preparing a meal together in their kitchen
For the heart of your home.

Questions
about Power failure LED.

Can I clear Power failure LED myself?
Touch the alarm icon to see the highest temperature reached during the outage. It shows for about a minute.
Is my Liebherr broken if the power failure LED is lit?
No, it is the FrostControl display recording that the freezer got too warm during an outage. It describes something that already happened, not a current failure. Touch the alarm icon to see the highest temperature reached.
How do I decide what food to keep after the Liebherr power failure LED comes on?
The peak temperature shown for about a minute after touching the alarm icon is your guide. Liebherr asks you to check whether food got too warm or even thawed. Touch the icon again to switch the display off afterward.

Back to your everyday

Still showing Power failure LED?

Book with the exact characters, the full model number, and whether it is still cooling — on a code, that is the whole starting point.

(844) 681-4650 Schedule a repair